19mm momentary push button switch silver 5 12V LED Switch

Metal button switch with light with lock button switch inside a metal sheet, there is a spring fulcrum in the middle, spring displacement and plastic bracket aging deformation, the switch is not flexible, can be disassembled after power off to see, if not plastic parts damaged, may be able to recover. The neutral line inside the switch is straight-through and has nothing to do with the switch components, so there is because the switch jumps the air switch, it is the insulation layer damage of the neutral line through the switch, and the damaged section can be cut off and rewired, and the insulation should be guaranteed. It may also be that the pin of the indicator light has a short circuit, and it is enough to rewire it. Structure of metal push button switch with light: indicator light, push button, return spring, bridge moving contact, static contact, terminal post. Usually each metal push button switch has two pairs of contacts. Each pair of contacts consists of a normally open contact NO and a normally closed contact NC. When the button is pressed, the two pairs of contacts act at the same time, the normally closed contact is disconnected, and the normally open contact is closed.

Our website shows most of our products,but not all.So just let us know what product do you need,and how many do you want.If we do not have it,we can also design and make a new mould to produce it.

Any requirements or question,welcome to “Send” us an e-mail Now!!!