double green and red electrical switch mold machineh Thickened silver contacts

Today I will focus on the instructions related to the 22mm la38 button switch. Many customers have purchased our 22mm button with mounting holes but do not know how to use or install it? The 22mm push button switch is different from the 22mm mounting hole button except for the installation hole and components, and the other functions, styles, and colors are the same. The LA38 series push button switch is made of environmentally friendly plastic heads, and the price is lower than that of metal. Customers who want an economical version can buy buttons made of this plastic material. If you buy the LA38 series buttons, you can also replace them with the LA38 series button heads if you want to buy them later.

When you receive our LA38 series push button switch, you will find that when the black thread is removed, there will be a transparent component that will also fall off, this is because it is used to fix the button on the panel when the button is installed in the panel A device behind. Only when the transparent component is removed and placed behind the panel can it be installed on a 22mm panel.

The correct installation method is as follows:

Step 1: Remove the outer packaging of the received button and take out the button

Step 2: Pull and twist the yellow safety catch to remove the head

Step 3: Take off the black fixing thread on the head, and take off the transparent ring at the same time.

Step 4: Place the head on the 22mm mounting panel, put the transparent ring behind the panel, and fix the black thread, so that the head is installed on the panel.

Step 5: Locate the “Top” logo near the head of the button and the base of the safety lock, align the positions, and rotate the yellow safety lock. The 22mm metal button can be successfully installed on the panel.